Here are our recommendations for setting up and using your Stages Power meter with a Garmin Edge 1000.
Head unit set up can affect the quality of the data captured from your Stages Power meter. These are the recommended settings used by Stages Power meter staff and athletes. We’ve also compiled known issues affecting this particular head unit, as well as our best recommendations to deal with these problems.
These recommendations come from our daily usage of the Garmin Edge 1000 head unit. They are our best recommendations to get the best possible data capture from your head unit, with the least chance of data drops and connection loss between your Stages Power meter and Garmin Edge 1000 head unit.
Pair based on confirmation of ANT+ ID, set data collection to once-per-second, and update head unit firmware
To add your Stages Power meter as a sensor, follow this touch screen key path on your Edge 1000:
MENU > Settings > Sensors > Add Sensor >
POWER > When the ANT+ ID appears that matches the sticker on your power
meter, check the box > Add
If your sensor is not active, it can still be added by selecting the + key in the lower right corner and entering in the ANT+ ID (preceded by zeroes) into the keypad.
Note that on your Edge 1000, the sensors are placed in a sensor pool. If you own multiple power meters, please be careful to confirm that the correct power meter is connected when beginning a ride in order to record your data. It is also possible to select your sensor and name it to associate the ANT+ ID with a particular bike or crank model.
You must zero reset your Stages Power meter after installation, and we recommend zero resetting once-per-week to keep your meter reading with maximal consistency.
To Zero Reset using your Edge 1000:
Rotate your Stages Power meter one full revolution to wake the meter, then orient it in the 6 o’clock position, click the ‘Calibrate’ function under the Power sensor profile.
The ‘Calibrate’ Zero Reset function can be found through this key path:
Press ‘Tools’ icon (screwdriver and wrench on the main screen) > Sensors > Power > Calibrate. Your Garmin Edge 1000 head unit will then return a Zero Reset (Calibration) value of 890 +/- 50 counts.
Shortcut: The Edge 1000 also offers a shortcut to power meter calibration on the status bar. Swipe down from the top of the screen and select "Calibrate" from the status bar menu.
Garmin Error Codes:
0 – Sensor no longer active. Activate the crank and connect it to your Garmin, then attempt calibration again.
32 – Crank position error. Rotate the crank into the 6
o’clock/vertical position and attempt calibration again.
Once-per-second recording. The Garmin Edge 1000 head unit has two data recording options (Smart Recording and 1 Sec.). The function ‘smart recording’ purposefully drops data packets when the information looks the same in order to save memory space. We absolutely recommend recording at once-per-second and downloading more frequently.
To set once-per-second recording, follow this key path:
Press ‘Tools’ icon (screwdriver and wrench on the main screen) > System > Data Recording > Recording Interval > 1 sec
While you’re in this screen of ‘Data Recording’ you may also be interested to consider "Include Zeros" or "Do Not Include Zeros" for your Cadence and Power averages. This is a personal preference for you, but keep in mind that these settings may have a large effect on the average power and cadence reading during your ride.
Just as we periodically offer improved performance through firmware updates for the Stages Power meter, Garmin works hard to make improvements and fixes within their devices through firmware updates, many of which can affect the device's ability to record and display information from your power sensor. With regards to this we strongly recommend checking and updating your Garmin head unit firmware on a regular basis.
To update your head unit firmware:
Connect device to PC, follow prompts in Garmin Web Updater application.
The Stages Power meter puts out a signal capable of spanning distances of 10-15 feet, so long as the receiving radio is properly oriented. Putting a head unit in a rider’s pocket, on the wrist, or mounting it within any sort of aero shroud or behind a water bottle can cause signal interference and data loss. Additionally, proximity to other electronics can cause RF interference.
: Signal drops and data loss.
: Make sure the Garmin head unit is in the open with reasonably clear line of sight to the Stages Power meter. Avoid positioning other electronics and wireless devices between the Edge 1000 and the power sensor, as this can disrupt the head unit's ability to receive the power sensor's signal.
: Do not use bar mounted combo bottle/head unit mounts. Do not cover the front of the Garmin head unit with plastic, carbon fiber or other material.
: Firmware bugs present in certain versions that cause intermittent values of 0 to be displayed while pedaling
: Lower than normal power average
: Update Edge 1000 device to most current firmware; additionally try disabling Bluetooth on the Edge 1000 to see if it improves performance.
: It is best practice to check for new firmware for both your Garmin head unit and Stages Power meter once per month.
Firmware bug causing drop of all ANT+ sensors or inability to find any ANT+ Sensors
Cause: Firmware bugs present in older firmware versions that can cause previously paired sensors to no longer connect after a break in riding or upon start of a new ride
Effect: No power recorded while riding, inability to pair or calibrate the sensor, or no power data after a stop during ride.
Solution: Update your Edge 1000 to the latest firmware using Garmin Express or the Garmin mobile app.
Problems finding sensor when ride is started before pairing
Cause: If the ride is started before the power sensor is paired, the Edge 1000 does not find the sensor or repeatedly drops sensor connection.
Effect: No power data or significant drops in power data.
Solution: Rotate your Stages Power meter before the start of a ride and ensure it is discovered by your Edge 1000 before beginning the ride with the start button.