Yes, the battery is simple and quick to change and does not require any tools. Before changing your cover, please note whether your Stages Power meter has our original or second generation plastic housing design, as the process to change the battery is slightly different.


First Generation

Second Generation

Video of Battery Removal


First Generation


To remove the battery:


Rotate the battery door into the "open" position and gently lift outwards to remove the battery door from the unit

If needed, use your finger to tilt the battery and lift it from the compartment. Avoid using sharp tools to remove the battery, as they can cause damage to the electronics within the power meter. 


To install the battery:


1. Insert a brand new CR2032 battery into the battery compartment, with the positive (+)  side facing outward. 

2. Before replacing the door, inspect the o-ring to ensure it is properly sitting into the channel and not twisted, broken, or partially sticking out

3. Re-insert the battery door into the power meter housing aligned with the "open" position

4. Rotate the cover clockwise into the closed position to lock the battery door into place




Stages Power meter gen 1 battery install


Back to Top


Second Generation


To remove the battery:


Rotate the battery door into the "open" position and gently lift outward on the battery door to lift out the cover and battery


To install the new battery:


1.  Insert the new CR2032 battery into the battery door, with the positive side facing the battery door.

2. Before replacing the door, inspect the o-ring to ensure it is properly sitting into the channel and not twisted, broken, or partially sticking out
Note: If needed you may want to angle the bike so that it is not at a 90 degree angle where the o-ring can easily fall out

3. Re-insert the battery door into the power meter housing aligned with the "open" position

4. Rotate the cover clockwise into the closed position to lock the battery into place


Stages Power meter gen 2 battery install


Back to Top


Video


The following video contains installation instructions for both generations of Stages Power meters:




Related Topics:

How do I check if my battery is running low?

What do I do if my battery cover is broken?


SC-E17.3